Skip to content

P244B

Powertrain
Moderate

Diesel Particulate Filter Differential Pressure Too High

What could P244B mean for your vehicle?

Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.

Next: review your vehicle and symptoms. Your code carries over. No account needed to start.

P244B means the pressure difference across the diesel particulate filter (DPF) is higher than expected. That usually means the filter is clogged and exhaust cannot get through easily. It can also be a bad sensor or blocked sensor tubes giving a false high reading.

A clogged filter causes less power, worse fuel economy, and often limp mode. Ignoring it makes the blockage worse and can lead to a filter that must be replaced, and extra back pressure is hard on the turbo.

A shop can check live pressure readings and try a forced regeneration. If the filter clears, the underlying cause such as short trips, an EGR fault or a failed regeneration still needs to be found. If it does not clear, the filter needs professional cleaning or replacement.

Severity

Moderate — Address SoonThis Week

Symptoms

  • •Check Engine Light illuminated
  • •Reduced engine power
  • •Engine may enter limp or emergency mode
  • •Higher fuel consumption
  • •Frequent or failed DPF regeneration

Likely Causes

Clogged DPF45%

Soot or ash restricts exhaust flow, so pressure before the filter is much higher than after it.

Faulty differential pressure sensor or blocked sensor tubes25%

A bad sensor or clogged tube reports a high difference that may not be real.

DPF regeneration system problem15%

If regeneration does not run or does not complete, soot keeps accumulating.

EGR valve malfunction10%

Too much soot production from an EGR fault can load the filter faster.

Exhaust damage or restriction5%

A crushed pipe or damaged component can raise pressure upstream.

Estimated Cost

DIY Repair

$30–$500
Difficulty
Shop OBD2 scanners

Professional Repair

$200–$3500

Includes parts + labor

Common Fixes

  1. Inspect the DPF and attempt a forced regeneration
  2. Test the differential pressure sensor and tubes
  3. Check the regeneration system, including injector and temperature sensors
  4. Clean or replace the DPF
  5. Check and repair the EGR system

Shop Parts

Related Codes

Still have questions about P244B?

Continue with P244B

Next: add your vehicle and symptoms. Your code carries over.