P244A
Diesel Particulate Filter Differential Pressure Too Low
What could P244A mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P244A means the pressure difference measured across the diesel particulate filter (DPF) is lower than expected. The computer uses two pressure readings, before and after the filter, to judge how clogged it is. A reading that is too low points to a sensor or tube problem, an exhaust leak, or a filter that is cracked or has been emptied.
The car is usually drivable, but you may see lost power, poorer economy, or trouble with regeneration. Because the filter cannot be monitored properly, the system may not regenerate when it should, which can cause problems later.
Start with the cheap checks: look at the pressure tubes and the exhaust for leaks, then test the sensor. A damaged filter is the costly outcome, so have it looked at within the week.
Severity
Symptoms
- •Check Engine Light illuminated
- •Reduced engine power
- •Higher fuel consumption
- •Trouble with DPF regeneration
- •Unusual exhaust noise if there is a leak
Likely Causes
A failed or drifting sensor reports less pressure difference than really exists.
Cracked, loose or blocked tubes to the sensor give a falsely low reading.
A leak upstream of the filter lets pressure escape and lowers the measured difference.
A cracked or emptied filter offers little restriction, so pressure across it is too low.
A faulty recirculation valve is a less common cause.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Inspect the exhaust system for leaks
- Test the differential pressure sensor
- Check and replace the pressure tubes
- Examine the DPF for damage
- Replace the DPF if it is damaged
Shop Parts
Related Codes
Still have questions about P244A?
Continue with P244ANext: add your vehicle and symptoms. Your code carries over.