P0842
Transmission Fluid Pressure Sensor/Switch A Circuit Low
What could P0842 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P0842 means the transmission fluid pressure sensor or switch A circuit is reading low. The PCM uses this sensor to confirm hydraulic pressure matches what it commanded for shifting and torque converter lockup.
The cause may be the sensor, wiring, the pressure control solenoid or poor fluid. Symptoms range from nothing but a warning light to harsh shifts, slipping and overheating.
Check fluid level and condition, then have the sensor circuit and solenoid tested. Address it this week, since low pressure can wear clutches.
Severity
Symptoms
- •Check Engine Light illuminated
- •Poor or harsh shifting
- •Transmission slipping
- •Torque converter clutch problems
- •Transmission overheating
- •Reduced fuel economy
Likely Causes
A failed sensor can output a low signal even when pressure is normal.
YourMechanic lists the solenoid as the most common cause on its page.
Fluid problems lower real pressure and can affect the sensor.
A signal wire shorted to ground or damaged will read low.
Blocked passages, internal failure or a bad PCM/TCM are less common.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Check fluid level and condition, then top off or replace
- Inspect wiring and connectors to the pressure sensor
- Replace the pressure sensor or switch
- Replace the pressure control solenoid
- Repair internal blockage or damage
Shop Parts
Related Codes
Still have questions about P0842?
Continue with P0842Next: add your vehicle and symptoms. Your code carries over.