Skip to content

P0776

Powertrain
Moderate

Pressure Control Solenoid B Performance or Stuck Off

What could P0776 mean for your vehicle?

Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.

Next: review your vehicle and symptoms. Your code carries over. No account needed to start.

P0776 means the control module sees pressure control solenoid B performing poorly or stuck off. This solenoid regulates hydraulic pressure in the automatic transmission, which affects shifting and torque converter lockup.

Some drivers notice nothing besides the light. Others get harsh shifts, slipping, a torque converter that will not lock, or limp mode. Low or dirty fluid, a worn solenoid, wiring faults and blocked passages are the usual causes. Check the solenoid and wiring before replacing the pump.

Check the fluid first. If it is low or burnt, fix that and retest. If the code returns, have the solenoid and wiring tested. Do not wait long, because low pressure can wear the clutches.

Severity

Moderate — Address SoonThis Week

Symptoms

  • •Check Engine Light illuminated
  • •Harsh or delayed shifting
  • •Transmission slipping
  • •Torque converter clutch not engaging or releasing
  • •Transmission may enter limp mode
  • •Reduced fuel economy

Likely Causes

Failing pressure control solenoid B35%

A solenoid that sticks or responds poorly cannot regulate line pressure as commanded.

Low, dirty or contaminated transmission fluid25%

Poor fluid causes solenoids and valves to stick and lowers hydraulic pressure.

Wiring or connector fault20%

Damaged wiring or corroded connectors can disrupt solenoid control.

Blocked hydraulic passages or valve body wear15%

Debris or wear in the valve body can keep the solenoid from controlling pressure.

Faulty PCM or TCM5%

Uncommon, but possible after other causes are ruled out.

Estimated Cost

DIY Repair

$40–$400
Difficulty
Shop OBD2 scanners

Professional Repair

$200–$1500

Includes parts + labor

Common Fixes

  1. Check fluid level and condition, then replace fluid and filter
  2. Inspect wiring and connectors to the solenoid
  3. Replace pressure control solenoid B
  4. Clean or replace the valve body
  5. Replace the PCM or TCM only as a last resort

Shop Parts

Videos

Causes and Fixes P0776 Code: Pressure Control Solenoid B Performance or Stuck Off

HVAC Mechanic

What is P0776 : Engine Error code Causes Explained

Auto User Guide

CVT or Automatic Transmission Fix For Nissan or other make. Try This First. Code P0776

ucanfixit

Related Codes

Still have questions about P0776?

Continue with P0776

Next: add your vehicle and symptoms. Your code carries over.