P0670
Glow Plug Module Control Circuit
What could P0670 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P0670 is a diesel code. It means the engine computer has found a fault in the control circuit for the glow plug module, which switches power to the glow plugs for cold starts.
The vehicle may crank longer, start hard in cold weather, knock until warm, and puff white smoke. In warm weather you may notice little. The code does not usually damage the engine, but starting can get worse over time.
Diagnose the electrical side before buying glow plugs. Test the battery, check fuses and the relay, and inspect the wiring and module connector. Replacing the glow plugs will not fix a control circuit fault.
Severity
Symptoms
- •Check Engine Light and glow plug indicator
- •Hard starting, especially when cold
- •Longer cranking before the engine fires
- •White smoke at startup
- •Louder knocking until the engine warms up
- •Misfire until warm
Likely Causes
The module switches power to the glow plugs. Internal failure is a common reason the circuit fault is flagged.
Open or shorted wires, or corroded connectors, upset the control signal.
A failed relay or fuse removes power or breaks the control circuit.
Low voltage can cause the module circuit to read out of range.
Rare. Check the module, relay, and wiring first.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Test the battery and charging system
- Repair damaged wiring, connectors, or grounds
- Replace the glow plug relay or blown fuse
- Replace the glow plug control module
- Replace the engine control module (rare)
Shop Parts
Related Codes
Still have questions about P0670?
Continue with P0670Next: add your vehicle and symptoms. Your code carries over.