P0380
Glow Plug/Heater Circuit A
What could P0380 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P0380 is a generic code for a malfunction in glow plug or heater circuit A on a diesel engine. The computer sets it when the circuit voltage is not what it expects. Glow plugs warm the cylinders to help the engine start in the cold.
You may notice hard starting, extra noise at startup, white smoke, and a glow plug light on the dash. The vehicle is unlikely to be undrivable, but it will not run well when cold and cold starts can get worse.
Have it checked this week. A shop will read freeze frame and related glow plug codes, then check wiring, fuses, the relay, and the plugs. If a fuse is blown, find out why before replacing it.
Severity
Symptoms
- •Check Engine Light and glow plug indicator
- •Hard starting, especially when cold
- •Longer cranking before the engine fires
- •White smoke at startup
- •Engine runs rough until warm
Likely Causes
Worn glow plugs change the circuit current and voltage.
Corrosion, open wires, or a blown fuse. A blown fuse usually means a short somewhere.
A failed relay interrupts power to the glow plug circuit.
The unit that controls glow time can fail and set the circuit code.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Test and replace faulty glow plugs
- Replace the glow plug relay
- Repair wiring or connectors and replace blown fuses
- Replace the glow plug timer or control module
Shop Parts
Related Codes
Still have questions about P0380?
Continue with P0380Next: add your vehicle and symptoms. Your code carries over.