P0473
Exhaust Pressure Sensor "A" Circuit High
What could P0473 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P0473 means the exhaust pressure sensor "A" circuit is reading high, so the engine computer sees a signal above what it expects. The sensor reports exhaust manifold pressure and is mainly used on turbocharged and diesel engines.
RepairPal rates it moderate. It may not affect driving or safety right away, but it should be diagnosed in a reasonable time. Symptoms listed for this code family include reduced power and failed manual regeneration.
Check wiring and the connector first, then test the sensor. If the code returns after clearing it, the sensor or its circuit is the likely cause.
Severity
Symptoms
- •Check Engine Light illuminated
- •Reduced engine power
- •Inability to perform a manual DPF regeneration
- •Related exhaust pressure codes may be stored
Likely Causes
An internal fault can drive the signal voltage high.
A short to power or damaged harness pushes the signal high.
A blockage can make the sensor report abnormal pressure.
Least likely, and only after the sensor and wiring pass testing.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Inspect and repair wiring, clean connectors
- Replace the exhaust pressure sensor
- Clear or replace the pressure tube
- Reflash the PCM if a software fix applies
Shop Parts
Related Codes
Still have questions about P0473?
Continue with P0473Next: add your vehicle and symptoms. Your code carries over.