P0471
Exhaust Pressure Sensor "A" Circuit Range/Performance
What could P0471 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P0471 means the exhaust pressure sensor "A" is reporting a signal the engine computer considers incorrect for exhaust manifold pressure. The sensor is mainly found on turbocharged and diesel engines, where exhaust pressure matters for turbo control and DPF regeneration.
RepairPal rates it moderate and says it may not affect driving right away. On diesels, reduced power and failed regenerations are possible with this family of codes. The code is often confused with an EGR code because the sensor tube sits near the EGR valve.
Have it diagnosed within a few weeks. Check the wiring and connector first, then the sensor and its tube.
Severity
Symptoms
- •Check Engine Light illuminated
- •Reduced engine power
- •Inability to perform a manual DPF regeneration
- •Related exhaust pressure codes (P0472, P0473) may be stored
Likely Causes
The sensor can drift or fail so its signal no longer matches expected exhaust manifold pressure.
Chafed, burnt, or corroded wiring and terminals distort the signal.
The sensor reads through a tube near the EGR valve, and a blockage skews the reading.
Least likely, and only after the sensor and wiring pass testing.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Inspect and repair damaged wiring, clean connectors
- Replace the exhaust pressure sensor
- Clear or replace the pressure tube
- Reflash the PCM if a software fix applies
Shop Parts
Related Codes
Still have questions about P0471?
Continue with P0471Next: add your vehicle and symptoms. Your code carries over.