P0366
Camshaft Position Sensor B Circuit Range/Performance (Bank 1)
What could P0366 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P0366 means the computer sees the bank 1 camshaft position sensor B signal outside the expected range or timing. Sensor B is on the exhaust cam.
Oil leaking onto the sensor or connector is a common reason, so fix the leak or the new sensor may fail too. Wiring, the crank sensor, and a weak battery are other possibilities.
Get it looked at this week since stalling and hard starting are possible. Many repairs run $150 to $300.
Severity
Symptoms
- •Check Engine Light illuminated
- •Delayed engine starting
- •Hesitation or poor acceleration
- •Rough idle
- •Reduced engine performance
- •Stalling or no-start in severe cases
Likely Causes
Oil on the sensor or connector, or a failed sensor, produces an out-of-range signal.
Shorts, opens, or corroded connectors distort the signal.
Cam and crank signals are compared, so a bad crank sensor can set it.
Low voltage during cranking can upset sensor readings.
Rare.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Fix oil leaks and replace damaged parts
- Replace the camshaft position sensor B
- Repair wiring or connectors
- Replace the crankshaft position sensor
- Charge or replace a weak battery, repair starting system
Shop Parts
Related Codes
Still have questions about P0366?
Continue with P0366Next: add your vehicle and symptoms. Your code carries over.