P0017
Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor B)
What could P0017 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P0017 means the computer sees the bank 1 exhaust (sensor B) camshaft signal out of sync with the crankshaft signal. Exact wording varies by maker, but it always points to cam and crank timing not matching.
Causes range from a weak sensor or wiring problem to VVT hardware faults and, most seriously, a stretched or jumped timing chain or belt. A jumped belt or chain can cause severe engine damage.
Do not keep driving if the engine runs poorly, rattles, or is hard to start. Check oil and have it diagnosed promptly. Repairs run from about $100 for wiring or a sensor up to $3,000 for timing components.
Severity
Symptoms
- •Check Engine Light illuminated
- •Cranks but will not start, or starts only after several tries
- •Rough or erratic idle
- •Poor performance
- •Rattling noise from the engine
- •Reduced fuel economy
Likely Causes
The exhaust cam falls out of sync with the crank, so the two signals no longer match.
Exhaust cam timing cannot follow commands when the VVT hardware sticks.
A weak sensor or broken reluctor wheel gives a false signal.
Incorrect viscosity or sludge restricts VVT oil flow.
Bad connections can corrupt sensor signals.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Check oil and wiring first
- Replace the camshaft or crankshaft sensor
- Replace the VVT solenoid, oil control valve, or actuator
- Replace damaged tone ring
- Replace timing chain/belt and tensioner
Shop Parts
Related Codes
Still have questions about P0017?
Continue with P0017Next: add your vehicle and symptoms. Your code carries over.