Skip to content

P0016

Powertrain
Moderate

Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A)

What could P0016 mean for your vehicle?

Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.

Next: review your vehicle and symptoms. Your code carries over. No account needed to start.

P0016 means the computer sees the bank 1 camshaft position signal out of step with the crankshaft position signal. The crank and cam are supposed to turn in a fixed relationship. When they do not, the computer cannot time fuel and spark correctly.

The most serious cause is a stretched or jumped timing chain, which can let valves hit pistons. More often it is a VVT problem, such as oil trouble or a bad oil control valve, or a failing position sensor.

Check oil first. If the engine runs rough, rattles, or stalls, limit driving and get it diagnosed quickly, because a timing chain fault can cause major engine damage. Costs range from a sensor at a couple hundred dollars to a timing chain job over $2,000.

Severity

High — Immediate AttentionWithin 24 Hours

Symptoms

  • •Check Engine Light illuminated
  • •Hard starting or no-start
  • •Rough, erratic running or hesitation
  • •Stalling
  • •Reduced power
  • •Lower fuel economy

Likely Causes

Stretched or jumped timing chain / belt35%

If the chain has stretched or skipped a tooth, the cam no longer lines up with the crank and the signals disagree.

Cam phaser or oil control valve fault25%

A stuck phaser or clogged OCV filter leaves cam timing off compared with the crank signal.

Low, dirty, or wrong-viscosity oil18%

Restricted oil flow to the phaser prevents correct cam positioning.

Faulty camshaft or crankshaft position sensor / tone wheel15%

A bad sensor or damaged reluctor wheel can send a signal that does not match the other.

Damaged wiring or connectors7%

Poor connections to the sensor or OCV can distort the signal.

Estimated Cost

DIY Repair

$35–$600
Difficulty
Shop OBD2 scanners

Professional Repair

$200–$2500

Includes parts + labor

Common Fixes

  1. Check oil level and condition, change with correct viscosity
  2. Repair wiring or connectors to the sensor or OCV
  3. Replace the bank 1 camshaft or crankshaft sensor
  4. Replace the oil control valve or cam phaser
  5. Replace timing chain, guides and tensioner

Shop Parts

Related Codes

Still have questions about P0016?

Continue with P0016

Next: add your vehicle and symptoms. Your code carries over.