P0021
"A" Camshaft Position - Timing Over-Advanced or System Performance (Bank 2)
What could P0021 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P0021 is the bank 2 version of P0011. The computer sees the bank 2 intake camshaft running more advanced than commanded, or the VVT system not performing. Bank 2 is the side without cylinder 1, so this code only appears on V-type or opposed engines.
Oil condition and level are the first checks, followed by the oil control valve or solenoid. Timing chain problems are less common but more costly.
Get it checked within a week. Costs run from an oil change to a chain job over $1,000.
Severity
Symptoms
- •Check Engine Light illuminated
- •Rough idle
- •Stalling
- •Lower fuel economy
- •Higher emissions
- •Reduced power
Likely Causes
VVT depends on oil pressure, so poor oil keeps the bank 2 intake cam from reaching the commanded position.
A sticking valve cannot route oil to the phaser correctly.
Damaged harness or connectors cause erratic solenoid or sensor signals.
Cam timing that is mechanically off will be read as over-advanced.
A bad sensor can report incorrect cam position.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Change oil and filter with correct viscosity
- Replace the bank 2 oil control valve or timing solenoid
- Repair wiring or connectors
- Replace camshaft position sensor
- Repair timing chain or belt
Shop Parts
Related Codes
Still have questions about P0021?
Continue with P0021Next: add your vehicle and symptoms. Your code carries over.