Skip to content

P0012

Powertrain
Moderate

"A" Camshaft Position - Timing Over-Retarded (Bank 1)

What could P0012 mean for your vehicle?

Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.

Next: review your vehicle and symptoms. Your code carries over. No account needed to start.

P0012 means the intake camshaft on bank 1 is staying more retarded than the engine computer commanded. The computer compares the camshaft position it asked for with the actual position from the cam and crank sensors, and sets the code when the camshaft lags behind for too long.

Most of the time the cam phaser isn't getting enough oil to move. Low or old oil, a stuck oil control valve and a blocked screen are the usual causes, so start with an oil check and change. A stretched timing chain is the expensive possibility, especially if you hear a rattle at startup.

Fix it soon. Running with wrong cam timing costs power and fuel, and a worn chain can jump teeth and damage the engine.

Severity

Moderate — Address SoonThis Week

Symptoms

  • •Check engine light on
  • •Less power and torque
  • •Higher fuel consumption
  • •Harder starting in some cases
  • •Rattle from the timing chain if it is stretched

Likely Causes

Low oil level, low oil pressure or worn-out oilMost common

The cam phaser needs oil pressure to move out of its fully retarded rest position.

Oil control valve stuck or its screen blockedMost common

If the valve doesn't open, oil can't reach the phaser.

Cam phaser defective or stuck in its rest positionCommon

A worn or seized phaser can't advance the camshaft.

Timing chain stretched or jumped a toothCommon

A stretched chain shifts the camshaft toward retarded.

Debris in the oil circuitLess common

Wear debris can block small oil passages to the phaser.

Estimated Cost

DIY Repair

$20–$300
Difficulty

DIY Friendly

Shop OBD2 scanners

Professional Repair

$150–$2700

Includes parts + labor

Common Fixes

  1. Check the oil level and change the oil with the grade the manufacturer specifies
  2. Test and clean or replace the intake oil control valve and its screen
  3. Check cam and crank correlation for a stretched timing chain
  4. Replace the cam phaser or timing chain set if diagnosed

Shop Parts

Related Codes

Still have questions about P0012?

Continue with P0012

Next: add your vehicle and symptoms. Your code carries over.