Skip to content

Ford Mustang Shelby GT350 Common Problems & Reliability Guide

car
2016–2020
1 generation2 OBD2 codes3 known problems0 recalls

Get Your FREE AI Diagnostic Report

Enter your year for a personalized diagnosis for your Ford Mustang Shelby GT350

Ford Mustang Shelby GT350

No account required · Takes 30 seconds

Overview

The Shelby GT350 is the track-focused Mustang built from 2016 to 2020, powered by the 5.2L "Voodoo" flat-plane-crank V8 making 526 hp and 429 lb-ft, revving to 8,250 rpm, with a six-speed manual only. The 2016 base and Technology Package cars became known for overheating their transmission and rear differential on track, which led to a long-running class action; from 2017 the coolers became standard. The Voodoo engine can also use a lot of oil, and some 2020 cars needed a free timing chain tensioner inspection. Buy an unmodified car with service records, and check the oil level often.

Ford Mustang Shelby GT350 service intervals, fluids and specs

Quick Summary

Most Serious Issues

  • Secondary Timing Chain Tensioner Not Activated (2020)

By Generation

Available Engines

5.2L Voodoo flat-plane-crank V8

Common OBD2 Codes

CodeFrequencyNotes
P0016
Occasional
Crankshaft and camshaft position correlation; a timing problem such as an unactivated secondary timing chain tensioner on affected 2020 cars should be checked before more driving.
P0300
Occasional
Random or multiple misfire; Ford lists misfires and rough running among the symptoms of the 2020 secondary timing chain tensioner problem.

Known Problems

2016 GT350s in base or Technology Package form were built without the transmission and rear differential coolers that came with the Track Package. On track, owners reported the drivetrain overheating and the car dropping into a reduced-power limp mode after a few laps. Owners filed a class action in 2017, and Ford made the coolers standard on all 2017 and later GT350s. If you plan track days in a 2016 base or Technology Package car, find out whether coolers were added.

Some Voodoo engines use a lot of oil. Ford's owner's manual supplement says the engine can use up to a quart every 500 miles with sustained high rpm, heavy loads, hard cornering or track use, and owners have complained about frequent top-ups. Check the dipstick regularly, ideally at every fill-up, because a car that runs low can be damaged.

On some 2020 GT350 and GT500 models built at Flat Rock from December 2, 2019 through December 16, 2020, the engine's secondary timing chain tensioner may not have been activated during assembly. Timing loss can cause misfires, rough running and internal engine damage. Under Ford's Customer Satisfaction Program 21B26, dealers inspected the tensioner and, if it was not activated, checked the timing and replaced the tensioners, guides and chains, plus any damaged engine parts, at no charge. Ask for proof the inspection was done on any 2020 car.

Related codes:P0016P0300

Need help diagnosing your vehicle?

Get AI Diagnostic Report