P2421
EVAP System Vent Valve Stuck Open
What could P2421 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P2421 means the EVAP vent valve stays open when the engine computer has commanded it closed. The vent valve, usually mounted on or near the charcoal canister by the fuel tank, lets fresh air into the canister during purging and closes to seal the system for leak tests. If it won't close, the system can't hold vacuum or pressure, and the test fails much as it would with a large leak.
Dirt and charcoal dust on the valve seat are the most common causes. The valve breathes outside air near the ground, and a canister that is breaking down sheds charcoal into it.
It won't affect how the vehicle drives, but the EVAP monitor won't finish and the vehicle will fail an emissions test. A vent valve is usually a modest repair; replace the canister too if it is shedding charcoal.
Severity
Symptoms
- •Check engine light on
- •No change in how the vehicle drives
- •EVAP readiness monitor not complete
- •Large-leak EVAP codes may be stored too
- •Failed emissions inspection
Likely Causes
Dust from the charcoal canister or road dirt drawn in through the vent can stop the valve from sealing when it is told to close.
The valve can stick open from wear or corrosion, so the system can't hold vacuum for its leak test.
A canister that is shedding charcoal keeps fouling the vent valve, so a new valve alone may not last.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Command the vent valve closed with a scan tool and check whether the EVAP system holds vacuum
- Inspect the vent valve and its filter for dirt, water and charcoal dust
- Replace the EVAP vent valve
- Replace the charcoal canister if it is leaking charcoal into the vent valve
Shop Parts
Related Codes
Still have questions about P2421?
Continue with P2421Next: add your vehicle and symptoms. Your code carries over.