Skip to content

P0496

Powertrain
Low

Evaporative Emission System Flow During Non-Purge

What could P0496 mean for your vehicle?

Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.

Next: review your vehicle and symptoms. Your code carries over. No account needed to start.

P0496 means the computer detects fuel vapor flow through the EVAP purge system when purge should be off. Some makes, including Honda, Hyundai, and Kia, describe it as EVAP high purge flow. It shows up more often on GM vehicles.

Most drivers notice nothing except the Check Engine Light. On some vehicles a stuck-open purge valve can cause hard starting after refueling or a rich mixture, which over time can harm the catalytic converter.

Check the fuel cap and look for vacuum leaks first. The purge solenoid is the most common failed part and is usually easy to replace. Have it fixed this month.

Severity

Low — MonitorThis Month

Symptoms

  • •Check Engine Light illuminated
  • •Usually no other noticeable symptoms
  • •Hard starting after fueling on some vehicles
  • •Rough idle or rich running on some vehicles
  • •Fuel smell on some vehicles

Likely Causes

Stuck-open or leaking purge solenoid/valve50%

The valve lets vapor flow into the intake when the computer commands it closed.

Faulty fuel tank pressure sensor20%

A bad EVAP pressure sensor can show flow that is not happening.

Vent valve or plugged canister problem15%

A faulty vent solenoid or plugged canister can disrupt EVAP pressure readings.

Wiring or connector problem10%

Poor electrical connections to the purge valve or sensor can give false readings.

Vacuum leak or loose fuel cap5%

Check the cap and hoses before replacing parts.

Estimated Cost

DIY Repair

$20–$200
Difficulty

DIY Friendly

Shop OBD2 scanners

Professional Repair

$100–$450

Includes parts + labor

Common Fixes

  1. Replace the purge solenoid/valve
  2. Repair or replace the fuel tank pressure sensor
  3. Replace the vent solenoid or canister if faulty
  4. Repair wiring and connectors
  5. Tighten or replace the fuel cap and fix vacuum leaks

Shop Parts

Related Codes

Still have questions about P0496?

Continue with P0496

Next: add your vehicle and symptoms. Your code carries over.