P0497
Evaporative Emission System Low Purge Flow
What could P0497 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P0497 is set when the computer sees less vapor flow through the EVAP purge system than expected. The EVAP system collects fuel vapor from the tank and burns it in the engine, and the purge valve controls that flow.
This is an emissions code. Most vehicles drive normally with it, though it can cause a failed emissions inspection and the code may clear on its own and return.
A scan tool test that commands the purge valve open is the quickest check. Replacing the purge valve fixes most cases. Plan to have it done this month.
Severity
Symptoms
- •Check Engine Light illuminated
- •Usually no noticeable drivability change
- •Possible failed emissions test
- •Fuel smell on some vehicles
Likely Causes
A stuck-closed or restricted valve prevents vapors from reaching the intake.
A restricted line between the canister and intake limits flow.
A saturated or clogged canister can restrict vapor flow.
A poor connection to the purge valve may stop it from opening.
A wrong reading may cause the computer to see low flow.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Replace the purge valve
- Clear or replace blocked purge lines
- Replace the charcoal canister if plugged
- Repair wiring and connectors to the purge valve
- Replace the EVAP pressure sensor if faulty
Shop Parts
Related Codes
Still have questions about P0497?
Continue with P0497Next: add your vehicle and symptoms. Your code carries over.