Skip to content

P0796

Powertrain
Moderate

Pressure Control Solenoid C Performance/Stuck Off

What could P0796 mean for your vehicle?

Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.

Next: review your vehicle and symptoms. Your code carries over. No account needed to start.

P0796 means pressure control solenoid C is electrically fine but the transmission doesn't respond as expected when it's used. These current-controlled solenoids set the pressure to a clutch or to line pressure, and what C controls depends on the transmission. On GM six-speed automatics, for example, it feeds the low/reverse and 4-5-6 clutches, and the code sets when the computer sees the gear ratio flare or slip.

The causes are usually hydraulic or mechanical: a worn clutch or cut piston seal, a sticking solenoid or valve, low or worn fluid, or leaks at the pump or valve body gaskets.

When it sets, the computer commonly commands maximum line pressure and stops adapting shifts, so shifts may feel harsh. Slipping makes the damage worse, so have it diagnosed soon.

Severity

High — Immediate AttentionWithin 24-48 Hours

Symptoms

  • •Check engine light on
  • •Slipping or flare on shifts
  • •Missing upper gears
  • •Harsh shifts from maximum line pressure
  • •Limp mode

Likely Causes

Worn or damaged clutch the solenoid feedsMost common

A cut piston seal, damaged clutch housing or worn clutch lets the gear slip, which the computer sees as the solenoid not doing its job.

Sticking solenoid or valve body valveMost common

Debris or wear can keep the solenoid from exhausting fluid or stick a clutch select valve in the valve body.

Low or worn fluid, or a loose or damaged filterCommon

Fluid problems lower the pressure available to the clutch circuit.

Damaged pump or valve body gaskets and sealsLess common

Leaks at the pump, filter plate or O-rings cut the pressure reaching the clutch.

Estimated Cost

DIY Repair

$150–$800
Difficulty
Shop OBD2 scanners

Professional Repair

$500–$4500

Includes parts + labor

Common Fixes

  1. Check the transmission fluid level and condition and inspect the filter
  2. Record freeze frame and failure data before clearing the code
  3. Inspect the solenoid body and valve body for debris and sticking valves
  4. Repair the clutch housing, seals or clutches if testing shows slip
  5. Repair or replace the fluid pump if it is damaged

Shop Parts

Related Codes

Still have questions about P0796?

Continue with P0796

Next: add your vehicle and symptoms. Your code carries over.