Skip to content

P060A

Powertrain
Moderate

Internal Control Module Monitoring Processor Performance

What could P060A mean for your vehicle?

Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.

Next: review your vehicle and symptoms. Your code carries over. No account needed to start.

P060A means a control module's internal self-check found a problem with its monitoring processor. Modules that control safety-critical outputs, such as an electronic throttle, run a second, independent processor that keeps checking the main one. If that monitoring processor, or the exchange of checks between the two, fails, the module sets P060A.

Poor supply voltage or grounds and internal module failure are the usual causes, and some makers have released software updates that fix this code. On some vehicles the code comes from another module, such as a hybrid battery control module, so note which module stored it.

Often there are no driving symptoms, but some vehicles reduce power or go into limp mode. Check battery voltage and grounds, then have a shop check for software updates before replacing the module.

Severity

Moderate — Address SoonThis Week

Symptoms

  • •Check engine light on
  • •Wrench or service light on some vehicles
  • •Often no change in how the vehicle drives
  • •Reduced power or limp mode possible
  • •Rarely stalling or starting problems

Likely Causes

Unstable supply voltage or poor module groundMost common

A weak battery, voltage spikes or a bad ground can upset the module's processors and fail the self-check.

Internal module hardware failureMost common

If the monitoring processor or its memory has failed, the module needs replacing or repairing.

Control module software faultCommon

Some makers have released updated module software that fixes this code.

Moisture or corrosion at the module or connectorLess common

Water in the module or its connector can cause internal errors.

Estimated Cost

DIY Repair

$0–$150
Difficulty
Shop OBD2 scanners

Professional Repair

$100–$1500

Includes parts + labor

Common Fixes

  1. Check the battery, charging voltage, and the module's power and ground connections
  2. Check for and install software updates for the module
  3. Clear the code and see whether it returns
  4. Replace or repair the control module if the fault returns with good power, ground and current software

Shop Parts

Related Codes

Still have questions about P060A?

Continue with P060A

Next: add your vehicle and symptoms. Your code carries over.