P0320
Ignition/Distributor Engine Speed Input Circuit Malfunction
What could P0320 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P0320 means the engine computer has found a problem in the circuit that carries engine speed information from the ignition or distributor sensor. The computer uses that signal, with crankshaft position, to time spark and fuel.
Some cars show only the Check Engine Light. Others stall, hard start, lose power, or will not start. If the signal drops out while driving, the engine can die, so treat it as more than a cosmetic code.
Have it diagnosed this week. Check battery condition, scan for misfire and crank or cam sensor codes, and inspect the wiring and connectors. Rule out the crankshaft and camshaft sensors before replacing the ignition speed sensor.
Severity
Symptoms
- •Check Engine Light illuminated
- •Hard starting or no start
- •Engine stalling
- •Loss of power
- •Rough running or misfires
- •Sometimes no symptoms besides the light
Likely Causes
The computer gets engine speed from these sensors, so a failing one often sets this code.
Shorted, corroded, or loose wiring in the speed signal circuit interrupts the signal.
On vehicles with a separate sensor, an internal failure sends no or bad engine speed data.
Low voltage can corrupt sensor signals and trigger the code.
Rare. Consider only after the sensors and wiring pass testing.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Repair wiring and connectors in the engine speed circuit
- Replace the crankshaft or camshaft position sensor
- Replace the ignition/distributor speed sensor
- Charge or replace a weak battery
- Replace or reprogram the engine control module as a last step
Shop Parts
Related Codes
Still have questions about P0320?
Continue with P0320Next: add your vehicle and symptoms. Your code carries over.