P0236
Turbocharger Boost Sensor A Circuit Range/Performance
What could P0236 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P0236 means the turbocharger boost sensor A signal is out of range or does not make sense compared with the MAP or BARO sensor. The engine computer checks this with the key on and engine off, and at idle.
The usual cause is an aging sensor that responds slowly. Carbon buildup or blocked hoses can also do it. The computer may cut boost, so the car feels weak under acceleration.
Get it looked at within a week. Replacing the sensor is often the fix.
Severity
Symptoms
- •Check Engine Light on
- •Loss of power as the ECM may disable boost
- •Weak acceleration
- •Boost seems limited or inconsistent
Likely Causes
YourMechanic calls age-related wear the most common failure.
The code sets when the readings are out of specification compared to MAP or BARO.
Deposits clog or foul the sensor.
Restrictions in the pressure line produce wrong readings.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Replace the boost sensor
- Clean the sensor of carbon deposits
- Repair or replace kinked or blocked hoses
- Check MAP and BARO sensor readings
Shop Parts
Related Codes
Still have questions about P0236?
Continue with P0236Next: add your vehicle and symptoms. Your code carries over.