Skip to content

P0183

Powertrain
Low

Fuel Temperature Sensor A Circuit High

What could P0183 mean for your vehicle?

Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.

Next: review your vehicle and symptoms. Your code carries over. No account needed to start.

P0183 means the signal from fuel temperature sensor A is above its valid range. The engine computer supplies 5 volts to the sensor and reads the voltage that's left. With a broken circuit nothing pulls that voltage down, so it reads close to 5 volts, which the computer sees as extremely cold fuel.

That is why an unplugged connector, an open signal wire, an open sensor or a broken ground wire are the usual causes. A short to another 5-volt circuit can do the same. Depending on the engine, the sensor sits in the fuel filter housing, pump, rail, return line or tank.

The computer uses a substitute value and most vehicles drive normally. Check the connector and wiring first, then measure the sensor.

Severity

Low — MonitorThis Month

Symptoms

  • •Check engine light on
  • •Fuel temperature in scan data reads extremely cold
  • •Usually no change in how the vehicle drives
  • •Hot-start problems possible
  • •Less precise fuel delivery on diesels

Likely Causes

Unplugged connector or open signal wireMost common

With the circuit open, the signal sits near the 5-volt reference, which the computer reads as extremely cold fuel.

Open sensorCommon

A thermistor that has failed open gives the same high-voltage signal as a broken wire.

Open sensor groundCommon

If the low reference (ground) wire is open or has high resistance, the signal rises to the top of its range.

Signal wire shorted to a 5-volt circuitLess common

A short to another 5-volt sensor supply can also hold the signal high.

Engine computer faultLess common

Rarely, the computer's sensor input fails.

Estimated Cost

DIY Repair

$30–$250
Difficulty

DIY Friendly

Shop OBD2 scanners

Professional Repair

$120–$450

Includes parts + labor

Common Fixes

  1. Make sure the fuel temperature sensor connector is fully seated
  2. Check the signal and ground wires for opens and high resistance
  3. Measure the sensor's resistance and replace it if it is open
  4. Check for a short to another 5-volt circuit if the wiring looks intact

Shop Parts

Related Codes

Still have questions about P0183?

Continue with P0183

Next: add your vehicle and symptoms. Your code carries over.