P0182
Fuel Temperature Sensor A Circuit Low
What could P0182 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P0182 means the signal from fuel temperature sensor A is below its valid range. The sensor is a thermistor fed with 5 volts from the engine computer: warm fuel lowers its resistance and the signal voltage, cold fuel raises them. A voltage close to zero is lower than any real fuel temperature could produce.
That points to a short: most often the signal wire touching ground, or a sensor that has shorted inside. Moisture in the connector is another common cause. The scan tool will usually show an impossibly high fuel temperature.
The computer uses a substitute value, so the vehicle usually drives normally, though diesel fueling may be less precise. Check the wiring and connector before replacing the sensor.
Severity
Symptoms
- •Check engine light on
- •Fuel temperature in scan data reads very hot
- •Usually no change in how the vehicle drives
- •Cold-start problems possible
- •Less precise fuel delivery on diesels
Likely Causes
A chafed signal wire touching ground pulls the voltage down, which the computer reads as extremely hot fuel.
A shorted thermistor has very low resistance and gives the same low-voltage signal as a grounded wire.
Water or corrosion in the connector can leak the signal to ground.
Rarely, the computer's sensor input fails.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Check the sensor reading with a scan tool, then unplug the sensor and see whether it changes
- Inspect the connector for water and corrosion
- Check the signal wire for a short to ground
- Replace the fuel temperature sensor if the wiring tests good
Shop Parts
Related Codes
Still have questions about P0182?
Continue with P0182Next: add your vehicle and symptoms. Your code carries over.