P0036
HO2S Heater Control Circuit (Bank 1 Sensor 2)
What could P0036 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P0036 is a general fault in the heater circuit of the downstream oxygen sensor on bank 1, sensor 2, which sits behind the catalytic converter. That sensor mainly checks how well the converter is working, and its heater gets it to operating temperature quickly.
When the heater circuit doesn't behave as commanded, usually because it is open, P0036 sets. A burnt-out heater in the sensor and wiring damaged under the car are the most common causes.
Driving is not affected, but the catalyst monitor may not finish, which can fail an emissions or readiness check.
Severity
Symptoms
- •Check engine light on
- •Usually no change in how the engine runs
- •Catalyst monitor doesn't complete
- •Failed emissions or readiness check
Likely Causes
The heater inside the sensor behind the catalytic converter has failed.
The downstream sensor's harness runs under the car where heat, water and debris reach it.
A shared fuse can set several heater codes at once.
Rarely, the computer's heater output or its software is at fault.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Check the oxygen sensor heater fuse
- Inspect the downstream sensor wiring and connector under the vehicle
- Measure the heater resistance and replace the bank 1 sensor 2 oxygen sensor if it is open
Shop Parts
Related Codes
Still have questions about P0036?
Continue with P0036Next: add your vehicle and symptoms. Your code carries over.