Skip to content

Triumph Tiger 800 Common Problems & Reliability Guide

motorcycle
2011–2014
1 generation6 known problems2 recalls

Get Your FREE AI Diagnostic Report

Enter your year for a personalized diagnosis for your Triumph Tiger 800

Triumph Tiger 800

No account required · Takes 30 seconds

Overview

The Triumph Tiger 800 is an adventure bike built around a 799cc inline triple, a longer-stroke version of the Street Triple 675 engine, sold in road-biased Tiger 800 and off-road Tiger 800 XC forms. It reached the US for 2011, was updated with ride-by-wire for 2015 and again for 2018, and was replaced by the Tiger 900 after 2019. Most bikes in owner surveys had no problems, and the complaints that do come up are mostly engine and fueling faults: a stepper motor that clogs or fails, early engine management software that could stall the bike, heat, and suspension damping problems. This guide covers the 2011-2014 bikes.

Triumph Tiger 800 service intervals, fluids and specs

Quick Summary

Most Serious Issues

  • Stalling on Deceleration (2011-2012)(Free under recall)
  • Engine Can Lose Power From ECU Fault (2014)(Free under recall)

2 recalls documented across all generations

By Generation

Available Engines

799cc liquid-cooled DOHC 12-valve inline-three

Known Problems

The most often reported fault is the idle stepper motor failing or clogging, which can make the bike stall at idle and hard to start. Cleaning or replacing the stepper motor and resetting the idle fixes it.

Shop parts for this repair

Engine management software on early bikes could drop the idle too low, and the engine could stall when slowing down. Triumph recalled 2011-2012 Tiger 800 and 800 XC bikes built from September 2010 through June 2011 to load new software into the ECU.

Shop parts for this repair

On some 2014 bikes built from February to August 2014 the ECU could trigger the fuel injectors incorrectly, and the engine could lose power without warning. Triumph recalled them to modify the ECU's hardware.

Shop parts for this repair

The engine tends to run hot in hot weather, and riders feel a lot of heat around the seat. Check that the radiator is clean and the fan works, and watch the temperature on a test ride.

Shop parts for this repair

Owners have reported problems with rebound damping, valving and adjustment, and some forks or shocks were replaced under warranty. On a used bike, check for leaking fork seals and a shock that has lost its damping.

Shop parts for this repair

Some owners report clunky gear changes and gear selector problems, and dealers dealt with an early clutch lifter arm issue. Make sure every gear selects cleanly on a test ride.

Shop parts for this repair

Recalls

2011
Engine May Stall When DeceleratingNHTSA

On certain 2011-2012 Tiger 800 and Tiger 800 XC motorcycles built from September 2010 through June 2011, an engine management software problem can lower engine rpm so the engine stalls when decelerating. Dealers download new engine management software into the ECU.

2014
ECU May Activate Fuel Injectors ImproperlyNHTSA

On certain 2014-2015 Tiger 800 and Tiger 800 ABS motorcycles, as well as other Triumph models built from February 6 to August 7, 2014, the engine control unit may activate the fuel injectors improperly, so the engine can lose power unexpectedly. Dealers modify the ECU's internal hardware.

Need help diagnosing your vehicle?

Get AI Diagnostic Report