Skip to content

Subaru Tribeca Common Problems & Reliability Guide

suv
2006–2014
1 generation1 known problems1 recalls

Get Your FREE AI Diagnostic Report

Enter your year for a personalized diagnosis for your Subaru Tribeca

Subaru Tribeca

No account required · Takes 30 seconds

Overview

The Subaru Tribeca three-row crossover was sold from the 2006 to the 2014 model year with 3.0L and 3.6L flat-six engines. Its best-known defect is the hood latch: rust or old grease can weaken the springs in both the hood lock and the safety catch, so the hood can open while driving. Subaru recalled every model year for it in 2016.

Subaru Tribeca service intervals, fluids and specs

Quick Summary

Most Serious Issues

  • Hood Latch Failure

1 recall documented across all generations

By Generation

Available Engines

3.0L H6
3.6L H6

Known Problems

The Tribeca's hood lock and hood safety catch can collect rust or old, hardened grease, which weakens their springs. If both stop working at once, the hood can pop open while driving and block the view. In one reported case, the hood of a 2006 Tribeca flew open at highway speed and broke the windshield. Subaru recalled about 77,000 2006-2014 Tribecas in 2016. Dealers first inspect, clean and lubricate the latch and replace it if it still does not work, then install an improved hood lock and safety catch once parts are available. If the hood does not stay caught on the safety latch after the release is pulled, have it fixed before driving.

Recalls

2006
Hood May Open UnexpectedlyNHTSA

Rust or grease buildup can weaken the hood lock and safety catch springs so the hood may open while driving and block the driver's view. Dealers inspect, clean and lubricate the latch, then install an improved hood lock and safety catch.

Need help diagnosing your vehicle?

Get AI Diagnostic Report