Royal Enfield Himalayan Common Problems & Reliability Guide
Get Your FREE AI Diagnostic Report
Enter your year for a personalized diagnosis for your Royal Enfield Himalayan
Overview
The original Royal Enfield Himalayan arrived in the US for 2018 as a simple, low-cost adventure bike with a 411cc air/oil-cooled single. It was replaced by the liquid-cooled Himalayan 450 for 2024. Its two best-documented problems are steering head bearings that wear out early because they're short of grease and let water in, and brake calipers that corrode on bikes ridden on salted roads, which led to a US recall. This guide covers the 411cc bikes.
Quick Summary
Most Serious Issues
- Brake Caliper Corrosion($0 under the recall; $150-$300 per caliper otherwise)
1 recall documented across all generations
By Generation
Available Engines
Known Problems
The steering head bearings are the Himalayan's most reported mechanical fault. Owners describe them going notchy or failing within a few thousand miles, and some have had them replaced under warranty. The bearings come with too little grease and let water in. Check for notchiness or a clunk when turning the bars with the front wheel off the ground, and re-grease or replace the bearings early with sealed aftermarket ones.
Typical mileage: 4,000-7,500 miles
Shop parts for this repairThe Bybre brake calipers corrode badly on bikes ridden in winter, and owners report the rear caliper rotting and the brakes seizing. Royal Enfield recalled 2017-2021 bikes in the US to replace both calipers. Make sure a used bike has had the recall done, and check that the pistons move freely and the pads aren't dragging.
Shop parts for this repairRecalls
On 2017-2021 Himalayan motorcycles, road salt can corrode the front and rear brake calipers, reducing or removing braking. Dealers replace both calipers.
Need help diagnosing your vehicle?
Get AI Diagnostic Report