Skip to content

Porsche Boxster Common Problems & Reliability Guide

car
1997–2016
3 generations6 known problems2 recalls

Get Your FREE AI Diagnostic Report

Enter your year for a personalized diagnosis for your Porsche Boxster

Porsche Boxster

No account required · Takes 30 seconds

Overview

The Porsche Boxster is a mid-engine two-seat roadster with a flat-six engine. The 986 (1997-2004) and 987 (2005-2012) generations used water-cooled M96 and M97 engines through 2008, whose intermediate shaft (IMS) bearing failures are the Boxster's most famous problem, along with rear main seal leaks and cylinder bore scoring. From 2009 the 987 switched to a new engine family without an IMS bearing, and the 981 (2013-2016) has few systematic mechanical problems. The 2017-on 718 Boxster is a separate generation and is not covered here.

Porsche Boxster service intervals, fluids and specs

Quick Summary

Most Serious Issues

  • IMS Bearing Failure($1,800-$4,000 (bearing retrofit))
  • IMS Bearing Failure (2005-2008)
  • Cylinder Bore Scoring (3.4L)($6,000-$18,000)

2 recalls documented across all generations

By Generation

Available Engines

2.5L flat-six (1997-1999)
2.7L flat-six (2000-2004)
3.2L flat-six (Boxster S, 2000-2004)

Known Problems

The intermediate shaft (IMS) bearing in the M96 flat-six can fail without warning, sending metal debris through the engine and often destroying it. Failures are not common, but upgraded replacement bearings are available and are often fitted during a clutch replacement. A car with a documented IMS upgrade is the safer buy.

Shop parts for this repair

The rear main seal between the engine and transmission commonly weeps oil. It does not cause engine failure, and it is usually replaced when the clutch is changed.

Shop parts for this repair

Available Engines

2.7L flat-six (2005-2008)
3.2L or 3.4L flat-six (Boxster S, 2005-2008)
2.9L flat-six (2009-2012)
3.4L flat-six (Boxster S and Spyder, 2009-2012)

Known Problems

The intermediate shaft (IMS) bearing in the 2005-2008 engines can fail without warning, sending metal debris through the engine and often destroying it. Some early 2005 cars still have the earlier serviceable bearing, but late 2005 through 2008 engines use a bearing that cannot be removed or replaced without taking the engine apart. The 2009-2012 engines do not have an intermediate shaft.

The cylinder walls can score, mainly on the 3.4L Boxster S engines; the 2.7L and the earlier 3.2L are less prone. Rising oil consumption, smoke and a cold-start rattle are the signs. The repair means rebuilding or replacing the engine, so a borescope inspection is worth doing before buying.

Shop parts for this repair

The rear main seal can weep oil between the engine and transmission. It is usually replaced with an updated seal during clutch work.

Shop parts for this repair

Available Engines

2.7L flat-six
3.4L flat-six (Boxster S)
3.8L flat-six (Boxster Spyder, 2016)

Known Problems

Side sections of the rear axle carrier on certain 2013-2015 cars could fracture, affecting handling. Porsche recalled them to replace the parts.

Shop parts for this repair

Recalls

2013
Rear Axle Carrier Side Sections May FractureNHTSA

The side sections of the rear axle carrier on certain 2013-2015 Boxsters may fracture, which can reduce vehicle control. Dealers replace the side sections.

2014
Front Hood May Not LatchNHTSA

On certain 2014-2015 Boxsters built in mid-2014, parts of the front hood lock may fail, so the hood may not stay latched and could open while driving.

Need help diagnosing your vehicle?

Get AI Diagnostic Report