Mercedes-Benz SL-Class (R129) Common Problems & Reliability Guide
Get Your FREE AI Diagnostic Report
Enter your year for a personalized diagnosis for your Mercedes-Benz SL-Class (R129)
Overview
This page covers the R129 Mercedes-Benz SL roadster sold in the US from the 1990 to the 2002 model year. US cars came as the 300SL and later SL320 with an inline six, the 500SL and SL500 with a V8, and the 600SL and SL600 with a V12. Common problems are engine wiring harnesses whose insulation breaks down on mid-1990s cars, head gasket leaks on the six-cylinder, worn-out Adaptive Damping System accumulators, and transmission fluid leaking into the wiring on cars with the later five-speed automatic.
Mercedes-Benz SL-Class (R129) service intervals, fluids and specs
By Generation
Available Engines
Known Problems
On R129s built through about 1995, the insulation on the engine wiring harness can crack and crumble with age and heat. A failing harness causes misfires and poor running. Cars with the original 3.0L six are not affected. The fix is a new engine harness, so ask whether one has already been fitted.
The inline-six engines in the 300SL and SL320 are prone to head gasket leaks, mostly on earlier cars and often driven by corrosion. Sudden, complete failure is rare, and a slow leak is the usual sign. Changing the coolant at least every three years helps prevent it.
The Adaptive Damping System is standard on the V12 SL600 and was optional on other R129s. Its hydraulic accumulator spheres wear out, and the valve bodies can also fail and are expensive to repair. If a car has the system, have it checked before buying.
On cars from about 1996 with the electronically controlled five-speed automatic, transmission fluid can leak out through the electrical connector on the transmission and travel along the harness into the transmission control unit. Once the fluid reaches the electronics, the transmission can stop changing gears.
Need help diagnosing your vehicle?
Get AI Diagnostic Report