Skip to content

Mazda MX-5 Miata Common Problems & Reliability Guide

car
1990–1997
1 generation1 known problems0 recalls

Get Your FREE AI Diagnostic Report

Enter your year for a personalized diagnosis for your Mazda MX-5 Miata

Mazda MX-5 Miata

No account required · Takes 30 seconds

Overview

This page covers the first-generation (NA) Mazda MX-5 Miata roadster, sold in the US from the 1990 to the 1997 model year with a 1.6L four-cylinder and, from 1994, a 1.8L. The best-known failure on these cars is the short-nose crankshaft used in 1990 and early 1991 1.6L engines, where a loose crank pulley bolt can wear out the key and keyway at the front of the crank.

Mazda MX-5 Miata service intervals, fluids and specs

Quick Summary

Most Serious Issues

  • Short-Nose Crankshaft Keyway Failure (1990-Early 1991 1.6L)($1,500)

By Generation

Available Engines

1.6L I4
1.8L I4

Known Problems

Miatas built through early 1991, up to about VIN serial 209446, have a short-nose crankshaft. Its front pulley and timing belt sprocket are held by a single bolt and a short key, and if that bolt loosens the load moves to the key, which can wear or break the keyway and the sprocket. Signs include a wobbling crank pulley and poor running as cam timing drifts, while a timing light can still show normal ignition timing. At worst the engine quits and the pulley drops onto the splash shield. Failures often follow timing belt or front seal work where the key or bolt was not refitted correctly. A damaged crank means an engine-out replacement, about $1,500 with a roughly $450 crank, and later long-nose or big-nose crankshafts, or a 1992-1993 engine, are the usual fixes. On a short-nose car, have a Miata-savvy mechanic do the timing belt and torque the bolt to spec.

Shop parts for this repair

Need help diagnosing your vehicle?

Get AI Diagnostic Report