Skip to content

Kia Optima Common Problems & Reliability Guide

car
2011–2020
2 generations2 known problems1 recalls

Get Your FREE AI Diagnostic Report

Enter your year for a personalized diagnosis for your Kia Optima

Kia Optima

No account required · Takes 30 seconds

Overview

The Kia Optima midsize sedan covered here spans two generations sold in the US from the 2011 to the 2020 model year. Both used Theta II 2.4L and 2.0L turbo direct-injection four-cylinders, which are known for connecting rod bearing failures. Kia recalled 2011-2014 Optimas for the problem, and a class action settlement gives owners of 2011-2018 and certain 2019 Optimas a lifetime engine warranty once the knock sensor software update is installed.

Kia Optima service intervals, fluids and specs

Quick Summary

Most Serious Issues

  • Theta II Engine Bearing Failure (2.0L Turbo and 2.4L)
  • Theta II Engine Bearing Failure (2.0L Turbo and 2.4L)

1 recall documented across all generations

By Generation

Available Engines

2.4L GDI I4
2.0L turbo GDI I4

Known Problems

Optimas with the 2.0L turbo and 2.4L Theta II direct-injection engines can suffer connecting rod bearing failure. Metal debris left from crankshaft machining can restrict oil flow and wear the bearings, leading to engine knock, metal in the oil, an oil pressure or check engine light, stalling and, at worst, engine seizure. A class action settlement covers 2011-2018 and certain 2019 Optimas with these engines and provides a lifetime engine warranty, but only once the Knock Sensor Detection System (KSDS) software update has been installed. Kia also recalled 2011-2014 Optimas to inspect the engine and replace it if needed. A knocking engine should be inspected by a Kia dealer before it is driven further.

Recalls

2011
Engine Bearing Wear May Cause SeizureNHTSA

Machining errors during engine manufacturing can cause premature bearing wear, which can lead to engine seizure and raise the risk of a crash. Dealers inspect the engine and replace it if necessary.

Available Engines

2.4L GDI I4
2.0L turbo GDI I4

Known Problems

Optimas with the 2.0L turbo and 2.4L Theta II direct-injection engines can suffer connecting rod bearing failure. Metal debris left from crankshaft machining can restrict oil flow and wear the bearings, leading to engine knock, metal in the oil, an oil pressure or check engine light, stalling and, at worst, engine seizure. A class action settlement covers 2011-2018 and certain 2019 Optimas with these engines and provides a lifetime engine warranty, but only once the Knock Sensor Detection System (KSDS) software update has been installed. Have a dealer confirm by VIN that the KSDS update is on record. A knocking engine should be inspected by a Kia dealer before it is driven further.

Need help diagnosing your vehicle?

Get AI Diagnostic Report