Indian Springfield Common Problems & Reliability Guide
Get Your FREE AI Diagnostic Report
Enter your year for a personalized diagnosis for your Indian Springfield
Overview
The Indian Springfield is an air-cooled bagger built on the same heavyweight platform as the Chief, Chieftain and Roadmaster, and it went on sale for 2016. Through at least 2022 it used the 1811cc Thunder Stroke 111 V-twin. The stock engine has a good reputation. The best-documented engine failure involves Indian's own Thunder Stroke 116 Stage 3 Big Bore kit, whose first-version connecting rods could fail, and the 2016-2020 bikes are covered by a service campaign for a fault that can kill the headlight and heat-damage the vehicle control module. This guide covers the 2016-2022 Thunder Stroke 111 Springfield.
Quick Summary
Most Serious Issues
- Connecting Rod Failure With the 116 Stage 3 Big Bore Kit
1 recall documented across all generations
By Generation
Available Engines
Known Problems
Indian sold a Thunder Stroke 116 Stage 3 Big Bore kit as a dealer-installed upgrade for 111 engines. A small number of engines with the kit suffered connecting rod failures, because the extra power put more stress on the rods than they could take, and bikes with aftermarket tuners or other performance changes were more at risk. Indian stopped selling the kit and issued a bulletin covering 2014-2018 111-powered models with the kit fitted, including 2016-2018 Springfields, under which dealers replace the pistons and rods with an updated set. Bikes that never had the kit are not affected. If you are looking at a used Springfield with the 116 kit, ask for proof that the updated rods went in. A dealer can look for the white paint mark Indian puts on engines with the updated kit.
Recalls
On certain 2016-2020 Springfield and Springfield Dark Horse motorcycles, along with other air-cooled Indian heavyweights, an electrical fault can cause a sudden loss of forward lighting and heat damage to the vehicle control module (VCM) and its center connector. Dealers inspect the connector for heat damage and update the VCM software, and replace the VCM and connector if they are damaged.
Need help diagnosing your vehicle?
Get AI Diagnostic Report