Hyundai Genesis Common Problems & Reliability Guide
Get Your FREE AI Diagnostic Report
Enter your year for a personalized diagnosis for your Hyundai Genesis
Overview
This page covers the first-generation Hyundai Genesis sedan, sold in the US from the 2009 to the 2014 model year with a 3.8L V6 or 4.6L V8. Its most serious documented problem is brake fluid that failed to protect valves in the ABS control unit from corrosion on 2009-2012 cars, which Hyundai recalled in 2013. NHTSA fined Hyundai $17.35 million in 2014 for recalling the cars late.
Quick Summary
Most Serious Issues
- ABS Control Unit Valve Corrosion (2009-2012)
1 recall documented across all generations
By Generation
Available Engines
Known Problems
The factory brake fluid in 2009-2012 Genesis sedans did not do enough to stop corrosion on the zinc-plated valve parts inside the hydraulic electronic control unit (HECU) that runs the ABS and stability control. Over time corrosion can keep the valves from working properly, and drivers notice a low or soft brake pedal with less stopping power. NHTSA counted 87 complaints and reports of six crashes before the recall. Under the recall, dealers flush the system and refill it with brake fluid that contains a corrosion inhibitor, and on cars built before June 1, 2010 they also test the HECU and replace it if it fails. Any 2009-2012 Genesis with a soft or sinking brake pedal should be checked for recall completion before it is driven.
Recalls
The brake fluid may not prevent corrosion of valves in the hydraulic electronic control unit, which can reduce braking performance and raise the risk of a crash. Dealers replace the brake fluid with a corrosion-inhibiting fluid and, on earlier cars, inspect and replace the control unit if needed.
Need help diagnosing your vehicle?
Get AI Diagnostic Report