Skip to content

Hyundai Azera Common Problems & Reliability Guide

car
2006–2011
1 generation1 known problems1 recalls

Get Your FREE AI Diagnostic Report

Enter your year for a personalized diagnosis for your Hyundai Azera

Hyundai Azera

No account required · Takes 30 seconds

Overview

This page covers the first-generation Hyundai Azera large sedan, sold from the 2006 to the 2011 model year with a 3.8L V6 and, from late in the 2007 model year, a 3.3L V6. Its best-documented problem is rust in road-salt states: the rear subframe can corrode from the inside until the rear control arms separate. Hyundai recalled the cars in 2013 along with the 2006-2010 Sonata, which shares the parts.

Hyundai Azera service intervals, fluids and specs

Quick Summary

Most Serious Issues

  • Rear Subframe Corrosion

1 recall documented across all generations

By Generation

Available Engines

3.8L V6
3.3L V6 (2007-2011)

Known Problems

In states that use road salt, the rear subframe (crossmember) on 2006-2011 Azeras can corrode from the inside and perforate. In bad cases a rear control arm can separate from its mounting point, which changes the rear wheel alignment and can cause a loss of control. NHTSA found reports of suspension separation and rear crossmember fractures, all on cars used in salt-belt states. Hyundai recalled about 239,000 Azeras and Sonatas in 2013 in 20 states and Washington, D.C. to inspect and repair the subframe. Heavy rust on the rear crossmember is a reason for an immediate inspection.

Recalls

2006
Rear Subframe Corrosion May Cause Control Arm SeparationNHTSA

In road-salt states, the rear subframe can corrode internally so the rear control arms or axle may separate, which can cause a loss of control. Dealers inspect the subframe and repair it as needed.

Need help diagnosing your vehicle?

Get AI Diagnostic Report