Skip to content

Ford Windstar Common Problems & Reliability Guide

van
1999–2003
1 generation1 known problems1 recalls

Get Your FREE AI Diagnostic Report

Enter your year for a personalized diagnosis for your Ford Windstar

Ford Windstar

No account required · Takes 30 seconds

Overview

This page covers the second-generation Ford Windstar minivan, sold from the 1999 to the 2003 model year with a 3.0L V6 on base models through 2000 and a 3.8L V6. Its best-known failure is the rear axle, which can corrode in road-salt states and crack until it fractures. Ford recalled 1998-2003 Windstars sold or registered in those states to inspect the axle and add reinforcement brackets.

Ford Windstar service intervals, fluids and specs

Quick Summary

Most Serious Issues

  • Rear Axle Corrosion and Fracture

1 recall documented across all generations

By Generation

Available Engines

3.0L V6 (1999-2000)
3.8L V6

Known Problems

The rear axle beam can trap road salt slush and corrode after years of winter driving. Corrosion makes it vulnerable to torsional stress, cracks can grow without obvious warning, and the axle can fracture completely, which affects handling and raises the risk of a crash. Ford recalled 1998-2003 Windstars built from September 1997 to February 2003 and sold or registered in 21 salt-belt states and Washington, D.C.; dealers inspect the axle and install reinforcement brackets, and a cracked axle is repaired. Ford later recalled the vans again because some brackets were installed incorrectly; on those vans the axle is replaced. Any surviving van from those states should be checked for the recall and for rust on the rear axle.

Recalls

1999
Rear Axle May Crack From CorrosionNHTSA

In salt-belt states, corrosion can weaken the rear axle until it cracks and fractures, which can affect handling and increase the risk of a crash. Dealers inspect the axle and install reinforcement brackets, repairing cracked axles.

Need help diagnosing your vehicle?

Get AI Diagnostic Report