Ford Crown Victoria Common Problems & Reliability Guide
Get Your FREE AI Diagnostic Report
Enter your year for a personalized diagnosis for your Ford Crown Victoria
Overview
The Ford Crown Victoria full-size sedan was sold from the 1992 to the 2011 model year, always with a 4.6L V8, and was a staple of police and taxi fleets. Two problems stand out. The all-plastic intake manifold used from 1996 to 2001 can crack at its coolant passage and dump coolant, and 2005-2011 cars in road-salt states can lose steering when the lower steering intermediate shaft corrodes, which Ford recalled in 2013.
Quick Summary
Most Serious Issues
- Cracked Plastic Intake Manifold (1996-2001)
- Steering Intermediate Shaft Corrosion (2005-2011)
1 recall documented across all generations
By Generation
Available Engines
Known Problems
The 1996-2001 Crown Victoria uses an all-plastic intake manifold with coolant running through a plastic crossover at the front. Heat cycling and the weight and belt tension of the alternator, which bolts directly to the plastic, can crack the manifold, usually at the front, and the heater hose fittings can also pull loose. The first sign is often a coolant leak at the front of the engine or a low coolant level, and a crack can open suddenly and cause overheating. If the temperature gauge climbs, stop the engine as soon as it is safe. Ford revised the manifold after the 2001 model year, using cast aluminum at the failure points. Ford settled a class action over the 1996-2001 manifolds in 2005, reimbursing owners who had paid for repairs.
Available Engines
Known Problems
On 2005-2011 Crown Victorias, including Police Interceptors, road salt can corrode the lower steering intermediate shaft until it seizes. The upper shaft can then collapse and the steering column lower bearing can separate, which can cause a sudden loss of steering. Drivers usually notice a change first: steering that feels notchy, stiff or binding. NHTSA's investigation found steering separation incidents both inside and outside the recall states. Ford recalled the cars in 2013 in 22 road-salt states and Washington, D.C., replacing the lower intermediate shaft and inspecting the upper shaft and bearing. Ford also ran a regional program to inspect and repair cars outside those states. A Crown Victoria with notchy or binding steering should not be driven until the steering shaft is checked.
Recalls
In road-salt states, the lower steering intermediate shaft can corrode and seize, letting the upper shaft collapse and the column lower bearing separate, which can cause a loss of steering. Dealers replace the lower intermediate shaft and inspect and repair the upper shaft and bearing.
Need help diagnosing your vehicle?
Get AI Diagnostic Report