Skip to content

Ferrari 458 Italia Common Problems & Reliability Guide

car
2010–2015
1 generation2 known problems2 recalls

Get Your FREE AI Diagnostic Report

Enter your year for a personalized diagnosis for your Ferrari 458 Italia

Ferrari 458 Italia

No account required · Takes 30 seconds

Overview

The Ferrari 458 Italia was sold from the 2010 to the 2015 model year with a naturally aspirated 4.5L V8 and a seven-speed dual-clutch gearbox. The engine has a good reputation and has no cambelts to replace. The problems owners report most are clutch glitches that need a sensor reset or software update and failing fuel level senders.

Ferrari 458 Italia service intervals, fluids and specs

By Generation

Available Engines

4.5L V8

Known Problems

Some owners report clutch glitches on the seven-speed dual-clutch gearbox. These are often fixed by resetting the clutch position sensors and updating the gearbox software rather than replacing parts. A full clutch replacement is very expensive and means removing the engine and gearbox, so ask for a clutch wear reading before buying.

Faulty fuel level senders have been reported, and at least one owner was left stranded at the roadside by a failed sender. If the fuel gauge or fuel warnings behave oddly, have the sender checked.

Recalls

2010
Rear Wheelhouse Adhesive Can Overheat and Catch FireNHTSA

Engine heat can deform the rear wheelhouse heat shields and move them close to the exhaust, which can overheat the bonding adhesive. In very hot weather the adhesive could smoke and catch fire. Dealers remove the old heat shields and adhesive and fit new heat shields.

2012
Incorrectly Machined Crankshaft Can FailNHTSA

On some 2011-2012 cars the crankshaft was machined incorrectly and can fail, which could make the engine seize. Dealers repair or replace the engine.

Need help diagnosing your vehicle?

Get AI Diagnostic Report