Dodge Grand Caravan Common Problems & Reliability Guide
Get Your FREE AI Diagnostic Report
Enter your year for a personalized diagnosis for your Dodge Grand Caravan
Overview
This page covers the 2011-2020 Dodge Grand Caravan minivan, which used the 3.6L Pentastar V6 for its whole run. Most of its well-known engine problems come from that V6: left cylinder head valve seat wear on early engines, covered by a Chrysler warranty extension, failing rocker arms that cause a ticking noise and misfires, and a plastic oil filter housing and cooler assembly that leaks oil or coolant into the engine valley.
Quick Summary
Most Common OBD2 Codes
Most Serious Issues
- Left Cylinder Head Valve Seat Wear (Early 3.6L)
By Generation
Available Engines
Common OBD2 Codes
| Code | Frequency | Notes |
|---|---|---|
| P0300 | Common | Random or multiple misfire; on 2011-2013 engines left cylinder head valve seat wear is a known cause, and a failed rocker arm can also set misfire codes. |
| P0302 | Occasional | Cylinder 2 misfire; cylinder 2 is on the left bank, so this can point to the left head valve seat problem. |
| P0304 | Occasional | Cylinder 4 misfire; also on the left bank of the 3.6L. |
| P0306 | Occasional | Cylinder 6 misfire; also on the left bank of the 3.6L. |
Known Problems
On 2011-2012 and some 2013 Grand Caravans, the valve guides and seats in the left cylinder head of the 3.6L V6 can wear, causing a misfire and a check engine light. Chrysler extended coverage of the left cylinder head from 5 years or 100,000 miles to 10 years or 150,000 miles under program X56, replaced the head after a set diagnosis, and reimbursed owners who had already paid. Later engines got hardened valve seats. A dealer can check by VIN whether a van is covered.
A ticking noise from the top of the 3.6L is often a failed rocker arm. It can set misfire codes and, if the engine keeps running with it, can damage the camshaft. The repair needs the valve covers removed, so it is mostly labor, and many shops replace the other rocker arms on that camshaft at the same time.
The 3.6L uses a plastic oil filter housing with a built-in oil cooler, mounted in the valley between the cylinder banks. Heat cycling can warp or crack it, and its O-rings can leak, so oil and sometimes coolant pool on top of the engine before any drips show under the van; the leak is easy to mistake for a more costly rear main seal leak. If only the O-rings leak they can be replaced on their own, which is much cheaper; a cracked housing has to be replaced, and that job means removing the intake manifold.
Need help diagnosing your vehicle?
Get AI Diagnostic Report