Skip to content

Dodge Avenger Common Problems & Reliability Guide

car
2011–2014
1 generation4 OBD2 codes3 known problems0 recalls

Get Your FREE AI Diagnostic Report

Enter your year for a personalized diagnosis for your Dodge Avenger

Dodge Avenger

No account required · Takes 30 seconds

Overview

This page covers the 2011-2014 Dodge Avenger midsize sedan, offered with a 2.4L four-cylinder or the 3.6L Pentastar V6. The documented problems are on the V6: left cylinder head valve seat wear on 2011-2013 engines, which Chrysler covered with a warranty extension, failing rocker arms, and a plastic oil filter housing that leaks oil or coolant into the engine valley.

Dodge Avenger service intervals, fluids and specs

Quick Summary

Most Common OBD2 Codes

P0300
Common

Most Serious Issues

  • Left Cylinder Head Valve Seat Wear (3.6L V6)

By Generation

Available Engines

2.4L I4
3.6L Pentastar V6

Common OBD2 Codes

CodeFrequencyNotes
P0300
Common
Random or multiple misfire; on 2011-2013 3.6L engines left cylinder head valve seat wear is a known cause, and a failed rocker arm can also set misfire codes.
P0302
Occasional
Cylinder 2 misfire; cylinder 2 is on the left bank of the 3.6L.
P0304
Occasional
Cylinder 4 misfire; also on the left bank of the 3.6L.
P0306
Occasional
Cylinder 6 misfire; also on the left bank of the 3.6L.

Known Problems

On 2011-2012 and some 2013 Avengers with the 3.6L V6, the valve guides and seats in the left cylinder head can wear, causing a misfire and a check engine light. Chrysler extended coverage of the left cylinder head from 5 years or 100,000 miles to 10 years or 150,000 miles under program X56, replaced the head after a set diagnosis, and reimbursed owners who had already paid. A dealer can check by VIN whether a car is covered.

Related codes:P0300P0302P0304P0306

A ticking noise from the top of the 3.6L is often a failed rocker arm. It can set misfire codes and, if ignored, can damage the camshaft. The repair needs the valve covers removed, so it is mostly labor, and many shops replace the other rocker arms on that camshaft at the same time.

Related codes:P0300

The 3.6L uses a plastic oil filter housing with a built-in oil cooler in the valley between the cylinder banks. Heat cycling can warp or crack it and its O-rings can leak, so oil and sometimes coolant collect on top of the engine before dripping to the ground. If only the O-rings leak they can be replaced on their own; a cracked housing has to be replaced.

Need help diagnosing your vehicle?

Get AI Diagnostic Report