Skip to content

Chrysler Town & Country Common Problems & Reliability Guide

van
2011–2016
1 generation4 OBD2 codes2 known problems0 recalls

Get Your FREE AI Diagnostic Report

Enter your year for a personalized diagnosis for your Chrysler Town & Country

Chrysler Town & Country

No account required · Takes 30 seconds

Overview

This page covers the 2011-2016 Chrysler Town & Country minivan, the years of the final generation that used the 3.6L Pentastar V6, before the Pacifica replaced it. The Pentastar engines in 2011-2012 and some 2013 vans are known for left cylinder head valve seat wear, which Chrysler covered with an extended warranty, and for leaking plastic oil filter housings.

Chrysler Town & Country service intervals, fluids and specs

Quick Summary

Most Common OBD2 Codes

P0300
Common

Most Serious Issues

  • Left Cylinder Head Valve Seat Wear (3.6L V6)

By Generation

Available Engines

3.6L Pentastar V6

Common OBD2 Codes

CodeFrequencyNotes
P0300
Common
Random or multiple misfire; on 2011-2013 3.6L engines left cylinder head valve seat wear is a known cause.
P0302
Occasional
Cylinder 2 misfire; cylinder 2 is on the left bank, so this can point to the left head valve seat problem.
P0304
Occasional
Cylinder 4 misfire; also on the left bank of the 3.6L.
P0306
Occasional
Cylinder 6 misfire; also on the left bank of the 3.6L.

Known Problems

On 2011-2012 and some 2013 Town & Country models with the 3.6L Pentastar V6, the valve guides and seats in the left cylinder head can wear, causing a misfire and a check engine light. Chrysler extended coverage of the left cylinder head from 5 years or 100,000 miles to 10 years or 150,000 miles (program X56) and reimbursed owners who had paid for the repair. A dealer can check by VIN whether a vehicle is covered.

Related codes:P0300P0302P0304P0306

The 3.6L Pentastar uses a plastic oil filter housing with a built-in oil cooler, mounted in the valley under the intake manifold. Coolant runs through it as well as oil, so a cracked housing or leaking O-rings can let oil, and sometimes coolant, pool in the valley before any drips show up underneath, which makes the leak easy to miss. Overtightening the filter cap, which is marked 25 Nm (18 lb-ft), can crack it. Replacing the housing and its seals is the fix, and aftermarket aluminum housings are available.

Need help diagnosing your vehicle?

Get AI Diagnostic Report