Skip to content

U0412

Network
Moderate

Invalid Data Received From Battery Energy Control Module A

What could U0412 mean for your vehicle?

Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.

Next: review your vehicle and symptoms. Your code carries over. No account needed to start.

U0412 means a module, usually the hybrid or engine controller, is receiving data from battery energy control module A that it rejects as invalid. Battery energy control module A manages the high-voltage battery on a hybrid, plug-in hybrid or electric vehicle. The module is still talking, unlike U0111 where contact is lost, but what it sends doesn't make sense to the receiver.

Software is often the cause. On the 2019 Chrysler Pacifica plug-in hybrid, for example, FCA lists U0412 among codes that can light the check engine light and stay stored as permanent codes, failing a smog check, and the fix is new software for the hybrid control processors along with other modules, not a battery part. Network wiring faults and a weak 12-volt battery are the next things to check.

Because the high-voltage system is involved, this is dealer or hybrid-specialist work. Charging or electric driving may be limited until it is fixed, so book it soon and ask about software updates first.

Severity

Moderate — Address SoonThis Week

Symptoms

  • •Check engine light on
  • •Hybrid system or charging warning message
  • •Charging or electric-only driving limited
  • •Code returns or stays as a permanent code after clearing
  • •Failed emissions or smog inspection

Likely Causes

Software fault in the hybrid control or battery management modulesMost common

The data isn't missing, it is being rejected as invalid, which often comes down to software. FCA, for example, fixes this code on the 2019 Chrysler Pacifica plug-in hybrid by updating the hybrid control processors.

Wiring or connector fault on the network between the modulesCommon

A poor connection on the data bus between the battery module and the hybrid controller can corrupt messages.

Weak 12-volt batteryLess common

Low voltage during start-up can upset the modules and the messages they send.

Failed battery energy control moduleLess common

The module that manages the high-voltage battery can fail internally, but software and wiring are checked first.

Estimated Cost

DIY Repair

$0–$150
Difficulty
Shop OBD2 scanners

Professional Repair

$100–$1500

Includes parts + labor

Common Fixes

  1. Ask a dealer whether a software update covers this code for your vehicle
  2. Test and charge the 12-volt battery
  3. Inspect network wiring and connectors between the battery module and the hybrid controller
  4. Replace the battery energy control module only after software and wiring check out

Shop Parts

Related Codes

Still have questions about U0412?

Continue with U0412

Next: add your vehicle and symptoms. Your code carries over.