U0401
Invalid Data Received From ECM/PCM A
What could U0401 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
U0401 is stored by a module, most often the transmission computer, that is still receiving messages from the engine computer but finds their content invalid. The data in question is usually engine torque or pedal position. U0100, by comparison, means the messages stopped arriving altogether.
Software is the most common fix, and Ford and GM have both released updates for U0401. The engine computer can also mark its own data invalid after one of its sensors fails, so clear up any engine codes first. Network wiring and low battery voltage are next on the list.
The transmission may shift harshly or go into limp mode, so have it checked soon.
Severity
Symptoms
- •Check engine light on, often stored in the transmission module
- •Harsh shifts or transmission limp mode
- •Adaptive cruise control switched off
Likely Causes
Several manufacturers, including Ford and GM, have released software updates for U0401.
After its own sensor fault, the engine computer can flag signals such as torque or pedal position as invalid.
Bad connectors, damaged wiring or low battery voltage can corrupt messages on the CAN bus.
Rarely, the engine computer itself has failed.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Scan all modules and fix any engine computer sensor codes first
- Check battery voltage and the main grounds
- Check for software updates for the engine and transmission computers
- Inspect CAN bus connectors and wiring
Shop Parts
Related Codes
Still have questions about U0401?
Continue with U0401Next: add your vehicle and symptoms. Your code carries over.