Skip to content

P261A

Powertrain
Moderate

Coolant Pump B Control Circuit/Open

What could P261A mean for your vehicle?

Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.

Next: review your vehicle and symptoms. Your code carries over. No account needed to start.

P261A means the engine computer found an open circuit in the control of coolant pump B, an auxiliary electric coolant pump. Depending on the vehicle, this pump keeps coolant moving after the engine is shut off to protect a hot turbocharger, or cools other parts such as electronics. The letter B only tells you which of the vehicle's pumps it is.

A failed pump is the most common cause, followed by a connector that isn't fully latched and broken wiring or a failed relay.

The engine usually drives normally, but without after-run cooling the turbocharger and nearby parts see more heat after a hot shutdown. Get the pump circuit checked soon.

Severity

Moderate — Address SoonThis Week

Symptoms

  • •Check engine light on, sometimes only now and then
  • •Code stored with no warning light on some vehicles
  • •Auxiliary coolant pump not running
  • •No coolant circulation after shutdown
  • •Higher temperatures at the turbocharger or electronics after hot shutdown

Likely Causes

Failed auxiliary electric coolant pumpMost common

The electric pump can fail internally, opening its motor or electronics so the computer sees an open circuit.

Connector not fully latched or with spread terminalsCommon

A pump connector that isn't fully seated, or one with loose terminals, opens the circuit intermittently.

Broken wire or failed relayCommon

An open in the supply or control wire, or a failed relay on systems that use one, leaves the pump without power.

Estimated Cost

DIY Repair

$60–$400
Difficulty

DIY Friendly

Shop OBD2 scanners

Professional Repair

$250–$900

Includes parts + labor

Common Fixes

  1. Check whether the auxiliary coolant pump runs when commanded with a scan tool
  2. Inspect and reseat the pump connector and check its terminals
  3. Check the pump's supply, ground and control wiring and any relay
  4. Replace the auxiliary coolant pump
  5. Check whether the vehicle has any open recalls

Shop Parts

Related Codes

Still have questions about P261A?

Continue with P261A

Next: add your vehicle and symptoms. Your code carries over.