P2563
Turbocharger Boost Control Position Sensor Circuit Range/Performance
What could P2563 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P2563 means the engine control module has found the position sensor on a variable-geometry turbocharger out of range or performing poorly. The sensor reports where the vanes or boost control actuator sit, and the signal does not match what the module expects.
The usual result is low boost, weak power under load, and sometimes reduced-power mode. The vehicle can often still be driven gently, but you will lose power and it can get worse.
Have it diagnosed this week. Soot cleaning is the cheapest fix when the vanes are sticking. If the actuator or turbo has failed, expect a larger repair.
Severity
Symptoms
- •Check Engine Light on
- •Low or no boost
- •Weak acceleration under load
- •Reduced-power (limp) mode
Likely Causes
The control module sees a position signal that does not match what it commanded.
Soot can keep the vanes from moving or returning to their normal position.
Vanes stuck or a worn turbo can leave the position out of range.
Damaged or corroded wiring can distort the sensor signal.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Clean soot from the turbo control system
- Replace the turbo actuator or position sensor
- Repair or replace the actuator wiring harness or connector
- Replace the turbocharger if cleaning does not clear the code
Shop Parts
Related Codes
Still have questions about P2563?
Continue with P2563Next: add your vehicle and symptoms. Your code carries over.