Skip to content

P2237

Powertrain
Moderate

O2 Sensor Positive Current Control Circuit/Open (Bank 1 Sensor 1)

What could P2237 mean for your vehicle?

Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.

Next: review your vehicle and symptoms. Your code carries over. No account needed to start.

P2237 means the engine computer has found an open circuit in the positive pump current line of the upstream wide-band oxygen (air/fuel ratio) sensor on bank 1. Wide-band sensors use this pump current to measure the exact mixture. With the wire open, the reading freezes near the ideal 14.7:1 ratio and stops moving.

A broken wire or a pushed-back pin at the connector is the most common cause, followed by a damaged sensor. VW and Hyundai have issued software updates for some false P2237 codes, so check for updates before replacing the sensor.

The engine falls back to less precise fuel control, which costs fuel and raises emissions.

Severity

Moderate — Address SoonThis Week

Symptoms

  • •Check engine light on
  • •Air/fuel ratio reading stuck at 1.0 (14.7:1) in live data
  • •Higher fuel consumption

Likely Causes

Broken pump current wire or pushed-back pinMost common

The wide-band sensor's pump current wire between the sensor and the engine computer is open.

Damaged pump cell in the wide-band sensorCommon

Thermal shock or contamination can damage the sensor's pump cell.

Engine software that sets the code falselyLess common

Some manufacturers, including VW and Hyundai, have released software updates for this code.

Estimated Cost

DIY Repair

$50–$250
Difficulty

DIY Friendly

Shop OBD2 scanners

Professional Repair

$150–$450

Includes parts + labor

Common Fixes

  1. Inspect the upstream air/fuel sensor connector and wiring for an open pump current wire
  2. Check for a manufacturer software update
  3. Replace the bank 1 sensor 1 air/fuel ratio sensor

Shop Parts

Related Codes

Still have questions about P2237?

Continue with P2237

Next: add your vehicle and symptoms. Your code carries over.