Skip to content

P2198

Powertrain
Low

O2 Sensor Signal Stuck Rich (Bank 2 Sensor 1)

What could P2198 mean for your vehicle?

Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.

Next: review your vehicle and symptoms. Your code carries over. No account needed to start.

P2198 means the upstream oxygen sensor on Bank 2 is reporting a signal that is stuck rich, outside the range the manufacturer expects. Bank 2 is the side of the engine opposite cylinder 1.

This code does not normally cause drivability problems, but a rich condition wastes fuel, so fix it reasonably soon.

A failed sensor is the most common cause, but check the wiring, look for vacuum or exhaust leaks, and confirm fuel pressure before replacing parts.

Severity

Low — MonitorThis Month

Symptoms

  • •Check Engine Light illuminated
  • •Reduced fuel economy
  • •Rich fuel condition (possible fuel smell)
  • •Usually no major drivability problems

Likely Causes

Faulty upstream O2 sensor (Bank 2 Sensor 1)45%

The sensor itself can fail and report a stuck rich signal.

Damaged wiring or connector at the sensor20%

Wiring faults can send an out-of-range signal.

Vacuum leak or fuel pressure problem20%

These can upset the air-fuel mixture and make the sensor read abnormally.

Exhaust leak10%

A major leak near the sensor can skew its reading.

Faulty PCM5%

Rare, only after other causes are ruled out.

Estimated Cost

DIY Repair

$40–$250
Difficulty

DIY Friendly

Shop OBD2 scanners

Professional Repair

$150–$500

Includes parts + labor

Common Fixes

  1. Replace the upstream O2 sensor (Bank 2 Sensor 1)
  2. Repair wiring or connector
  3. Fix vacuum leaks
  4. Check fuel pressure and repair fuel delivery
  5. Repair exhaust leaks

Shop Parts

Videos

How to Fix P2198 Engine Code in 5 Minutes [4 DIY Methods / Only $8.76]

nonda

Causes and Fixes P2198 Code: O2 Sensor Signal Biased/Stuck Rich (Bank 2 Sensor 1)

HVAC Mechanic

Causes and Fixes P2197 Code: O2 Sensor Signal Biased/Stuck Lean (Bank 2, Sensor 1)

HVAC Mechanic

Related Codes

Still have questions about P2198?

Continue with P2198

Next: add your vehicle and symptoms. Your code carries over.