P2032
Exhaust Gas Temperature Sensor Circuit Low (Bank 1 Sensor 2)
What could P2032 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P2032 means the engine computer sees a low voltage from the exhaust gas temperature sensor on Bank 1, Sensor 2. It is most common on diesel engines. The sensor helps the engine monitor the catalytic converter or aftertreatment system.
On its own the code is not usually serious. The main effects are a lit Check Engine Light and, on some vehicles, reduced power from a protective mode. It can also affect emissions.
Have the sensor and wiring checked this month. If you tow heavy loads or see other exhaust-related codes, get it looked at sooner.
Severity
Symptoms
- •Check Engine Light illuminated
- •Reduced power (limp mode) on some vehicles
- •Drivability problems under certain conditions
- •Other exhaust temperature or DPF codes may be stored
Likely Causes
These sensors live in extreme heat and often fail, for example after heavy towing.
A short to ground or chafed wiring in the sensor circuit reads as low voltage.
A converter that is not warming up properly can produce readings the module flags.
Uncommon, and only after the sensor and wiring check out.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Replace the EGT sensor (Bank 1 Sensor 2)
- Repair wiring or connector
- Inspect or replace the catalytic converter
- Update or replace the ECM
Shop Parts
Still have questions about P2032?
Continue with P2032Next: add your vehicle and symptoms. Your code carries over.