P0973
Shift Solenoid A Control Circuit Low
What could P0973 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P0973 is set when the transmission computer sees a low voltage in the control circuit for shift solenoid A. The code applies to automatic transmissions. The solenoid helps control when and how the transmission changes gears.
The car is usually still drivable, but you may get harsh shifts or trouble getting into some gears. Ignoring it can lead to serious transmission damage.
Check the fluid level and condition first. Then inspect the wiring and connector at the transmission. If both are fine, have the solenoid and circuit tested.
Severity
Symptoms
- •Check Engine Light illuminated
- •Harsh shifting
- •Difficulty or inability to shift into certain gears
- •Uneven acceleration
- •Reduced fuel economy
Likely Causes
The solenoid coil or internal parts can fail, leaving the circuit voltage low.
Chafed wires or corroded connectors at the transmission can short the circuit and set the code.
Debris can foul the solenoid, and low fluid hurts shift operation.
A fault in the circuit between the module and solenoid can pull the voltage low.
Rare, and only worth considering after the solenoid and wiring test good.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Replace shift solenoid A
- Repair wiring or connectors at the transmission
- Add or replace transmission fluid and filter
- Repair the control circuit
- Replace or reprogram the TCM or PCM
Shop Parts
Related Codes
Still have questions about P0973?
Continue with P0973Next: add your vehicle and symptoms. Your code carries over.