P0882
TCM Power Input Signal Low
What could P0882 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P0882 means the transmission control module is seeing low voltage at its power input. The cause is usually electrical, not mechanical.
On some vehicles the transmission goes into limp mode and stays in low gear. Others drive normally with only the light on. The common causes are a weak battery, low alternator output, or bad wiring and connectors.
Test the battery and charging system first, then inspect the TCM power circuit. These are often inexpensive fixes. Do it this week, because limp mode can leave you stranded or hurt fuel economy.
Severity
Symptoms
- •Check Engine Light illuminated
- •Transmission stuck in low gear (limp mode)
- •Transmission may shift normally with only the light on
- •Possible other stored transmission codes
Likely Causes
Low system voltage is a main cause listed by YourMechanic.
Low charging voltage can drop the supply to the TCM.
Bad wiring, fuses or connectors reduce voltage at the module.
YourMechanic notes this can cause false voltage codes.
Rare.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Load-test the battery and replace it if weak
- Test alternator output and replace if low
- Inspect TCM power fuses, wiring and connectors
- Test starter current draw
- Replace the TCM or PCM only after other causes are ruled out
Shop Parts
Related Codes
Still have questions about P0882?
Continue with P0882Next: add your vehicle and symptoms. Your code carries over.