Skip to content

P0571

Powertrain
Low

Cruise Control/Brake Switch A Circuit

What could P0571 mean for your vehicle?

Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.

Next: review your vehicle and symptoms. Your code carries over. No account needed to start.

P0571 means the computer has found a fault in the brake switch A circuit used by the cruise control system. The switch tells the computer when you press the brake so cruise control can cancel. If the signal looks wrong, the computer sets the code and usually disables cruise control.

On its own the code is not dangerous. The most common result is that cruise control stops working and the Check Engine Light comes on. It can appear with other brake switch or cruise control codes, and the same switch often controls the brake lights, so check that the brake lights work.

Start by checking the brake lights, the fuses, and the switch and connector at the top of the brake pedal. Replacing the switch is a common, inexpensive fix. If the code returns, have the wiring and cruise control switches tested.

Severity

Low — MonitorThis Month

Symptoms

  • •Check Engine Light illuminated
  • •Cruise control will not engage
  • •Cruise control may not cancel when the brake pedal is pressed
  • •Brake lights stay on or do not come on (if the switch is shared)
  • •Cruise control indicator flashes or is unavailable

Likely Causes

Faulty or misadjusted brake pedal switch45%

The switch tells the computer when the brake is pressed. Wear or poor adjustment can send a signal that does not match the pedal position.

Damaged wiring or corroded connector at the brake switch25%

Chafed wires or corrosion near the pedal bracket can cause an open, short, or intermittent signal.

Blown fuse in the brake switch or cruise circuit12%

A blown fuse removes power to the circuit. It usually points to a short elsewhere that needs finding.

Faulty cruise control switches or spilled liquid damage10%

Liquid spilled near the controls can corrode or short them and set the code even with a good brake switch.

Faulty control module8%

Rarely, the module that reads the switch has failed. Check the switch and wiring first.

Estimated Cost

DIY Repair

$15–$80
Difficulty

DIY Friendly

Shop OBD2 scanners

Professional Repair

$100–$300

Includes parts + labor

Common Fixes

  1. Replace or readjust the brake pedal switch
  2. Repair damaged wiring or clean corroded connectors
  3. Replace blown fuses and find the cause
  4. Repair or replace cruise control switches
  5. Replace the control module (rare)

Shop Parts

Still have questions about P0571?

Continue with P0571

Next: add your vehicle and symptoms. Your code carries over.